How to Reduce Condensation in the Home
Practical steps to stop condensation on windows and walls: ventilate, heat evenly, dry laundry wisely and fix the habits that add moisture.
The short answer
Condensation happens when warm, moist air meets a surface cold enough to make the water vapour condense into droplets. In a home, that surface is usually a window, a wall behind a wardrobe, a tiled bathroom ceiling or a cold corner of a bedroom.
You cannot stop condensation by wiping windows alone. You need to do two things at once: reduce the moisture you produce and let the moist air escape. Heating helps, but only if the air can move; warm, trapped air in a sealed room will still condense on the coldest surface.
The fastest improvements come from everyday habits: using extractor fans, putting lids on pans, drying clothes outside or in a ventilated room, and opening windows for a short, wide burst each morning.
What you need before you start
- A hygrometer (a small indoor humidity meter) so you can see whether the air is actually damp.
- Working extractor fans in the kitchen and bathroom, or a window that opens wide.
- A window vacuum, squeegee or absorbent cloth for daily wiping.
- A drying rack and, if you have one, access to an outdoor line or a tumble dryer vented properly.
- Lids for pans and a kettle that switches off at the boil.
- A dehumidifier if one room stays damp despite better habits.
- Indoor relative humidity
- Aim for roughly 40–60% in living areas; above 70% is a warning sign.
- Background heating
- Around 18–20°C in rooms you use, rather than short blasts of high heat.
- Extractor fan run-on
- Leave it running for about 10–15 minutes after cooking or showering.
- Daily window wipe
- In cold weather, dry glass and frames each morning to stop water running into the frame.
Step by step: getting condensation under control
-
01 /
Find the wettest rooms
Put a hygrometer in the kitchen, bathroom and main bedroom for a few days. Note when readings climb: after showers, cooking, laundry or overnight. Condensation on the windows is a clue, but a meter tells you whether the air is damp even when the glass is dry.
-
02 /
Open windows wide for a short burst
First thing in the morning, open windows on opposite sides of the home for 10–15 minutes. A short, wide burst replaces moist air faster than leaving a window on the latch all day, and it cools the walls less.
-
03 /
Run extractor fans at the source
Switch the bathroom fan on before you get in the shower and leave it running for 10–15 minutes afterwards. Do the same with the kitchen fan before you start cooking. If the fan is noisy, weak or blocked, clean the grille or have it checked.
-
04 /
Keep moisture out of the air when cooking
Use pan lids, simmer rather than boil hard, and switch the kettle off at the boil. A pot of water bubbling uncovered for 20 minutes puts a surprising amount of moisture into the air.
-
05 /
Dry laundry outdoors or in a ventilated room
Dry clothes outside whenever possible. If you must dry indoors, use a room with the door closed and a window open, or a room with a working extractor fan. Avoid draping wet washing over radiators: it dries slowly and releases moisture into the warmest air in the house.
-
06 /
Keep furniture and curtains clear of cold walls
Leave a gap of a few centimetres between wardrobes, sofas and the wall. Air needs to move behind furniture; a blocked gap stays cold and damp, and mould often starts there first.
-
07 /
Keep a steady background temperature
Rather than letting rooms go cold and then heating them hard, keep a steady background heat of around 18–20°C in rooms you use. Cold walls and windows make condensation more likely, especially in bedrooms and bathrooms.
-
08 /
Wipe windows and check for leaks
Wipe condensation from glass and frames each morning in cold weather, and wring the cloth out outside. While you are there, look for cracked sealant, blocked gutters, leaking pipes or damp patches on walls. Those need fixing, not just ventilating.
-
09 /
Review after two weeks
Check the hygrometer again. If one room is still damp, look for a source you have missed: an unvented dryer, a leaking roof, a blocked air brick, or a bathroom fan that does not extract. Adjust one thing at a time so you can see what works.
Ventilation without losing too much heat
Ventilation is the most effective single fix, but it does not mean living with windows open in winter. Use the shortest route for moist air to leave:
- Cross-ventilate by opening windows on two sides of the home for a few minutes.
- Keep trickle vents open on modern windows unless the room is genuinely draughty.
- Leave internal doors open when rooms are in use so air can circulate; closed doors trap moisture in kitchens and bathrooms.
- Do not block air bricks, vents or flues. They are there for a reason.
Heating and insulation: why some rooms fog up
Condensation collects on the coldest surface, which is why single-glazed windows, north-facing walls and corners behind furniture are often the first places you see it. Improving insulation and glazing helps, but it can also make a home tighter, so ventilation has to keep up.
- Keep radiators clear of furniture, curtains and drying clothes.
- Do not seal up every gap in an older home without adding planned ventilation; some draughts are doing a job.
- In bedrooms, leave the door open a little and keep a window on a trickle vent overnight if condensation is heavy.
- If a wall is permanently cold and damp, suspect a thermal bridge or a leak, not just bad habits.
Cooking, showering and laundry: the big three
| Source | What helps | What to avoid |
|---|---|---|
| Cooking | Lids on pans, low simmer, extractor fan on before you start | Uncovered boiling, leaving the fan off, drying tea towels on the radiator |
| Showering | Fan on before and after, window open, squeegee the screen | Leaving the bathroom door open so steam spreads through the house |
| Laundry | Outdoor line, vented dryer, or a closed room with a window open | Drying on radiators in a sealed room |
| Houseplants and aquariums | Group them, avoid overwatering, keep lids on aquariums | Large open water surfaces in warm, still rooms |
The pattern is simple: every source of steam is easier to deal with at the source than after it has spread through the home.
What commonly goes wrong — and how to fix it
- Painting over mould without fixing the damp. The paint may cover it for a while, but the moisture will push through again. Clean the area, improve ventilation, and treat any leak.
- Sealing every draught. Draught-proofing can make a home warmer, but if you block all airflow, moisture has nowhere to go. Keep planned vents and extractor fans working.
- Drying clothes on radiators. This adds moisture to the warmest air, which then condenses on cold windows and walls. Use a drying rack in a ventilated room or dry outside.
- Turning the heating off completely. Cold air holds less moisture, but cold surfaces are more likely to condense. A steady background heat is usually better than alternating hot and cold.
- Buying a dehumidifier and changing nothing else. A dehumidifier can help a damp room, but it will not fix a leaking roof, an unvented dryer or a bathroom with no fan.
- Wiping windows with a soaked cloth. You are just moving water around. Wring the cloth out outside and dry the frame, not only the glass.
Safety and easy-to-get-wrong points
Condensation itself is not dangerous, but the mould and damp it encourages can affect your home and your health. Take these points seriously:
- Do not mix cleaning products when treating mould; use one product at a time and ventilate the room.
- Wear gloves and a mask if you are cleaning a large area of mould, and keep children and pets out of the room.
- Never cover or block air vents, flues or combustion air supplies, even if they feel draughty.
- If you have a gas appliance, do not seal a room to keep it warm without checking that it still has adequate ventilation.
- If a wall stays damp even after better ventilation, it may be a leak, rising damp or a plumbing problem. Get it checked rather than treating the surface repeatedly.
Common questions
Does opening windows in cold weather make condensation worse?
No, not in the long run. A short burst of ventilation removes moist air and dries the surfaces. Leaving windows open all day can cool the walls, so use a wide burst for 10–15 minutes rather than a permanent gap.
Should I leave the heating on all day to stop condensation?
A steady background temperature helps more than short hot blasts, but heating alone will not stop condensation if the air is damp and trapped. Combine it with ventilation and reducing moisture at source.
Why is condensation worse in the morning?
Bedrooms produce moisture overnight from breathing, and the air cools towards dawn. The water vapour condenses on the coldest surfaces, often the window glass, as the room cools.
Will a dehumidifier stop condensation?
It can reduce condensation in a closed, damp room, but it will not fix a whole house with no ventilation or a leak. Use it as a supporting measure, not a replacement for extractor fans and airflow.
What causes condensation on walls rather than windows?
Cold walls, blocked airflow behind furniture, leaks, or moisture migrating from a bathroom or kitchen. Check the wall for damp patches and look for a local source before assuming the whole house is too humid.
How do I stop condensation on single-glazed windows?
Ventilate the room, keep the background heat steady, and wipe the glass each morning. If the glass is always cold, improving the glazing or using a less obstructive window covering may help, but reducing moisture and improving airflow matter more.


