How to Clean a Mattress Properly: Step-by-Step Guide
Learn how to clean a mattress properly: vacuuming, deodorising with bicarbonate of soda, lifting stains and drying it without soaking the filling.
The short answer
Cleaning a mattress comes down to three things: vacuum it thoroughly, lift any stains using as little liquid as possible, and draw out odour with dry bicarbonate of soda. Then give it long enough to dry completely before the bedding goes back on.
The rule that matters more than any product is this: never wet the filling. Foam, wadding and natural fillings hold water, and a mattress that stays damp inside is exactly where mould and dust mites settle in. Keep every liquid to a barely damp cloth, dab rather than scrub, and treat drying as part of the job rather than an afterthought.
What you need before you start
You probably own most of this already. Gather it first so you aren't rummaging under the sink while a spill dries into the fabric.
- Vacuum cleaner
- One with a hose plus an upholstery attachment; the crevice tool is what gets into seams and piping.
- Bicarbonate of soda
- A plain tub of dry bicarbonate of soda for deodorising. Baking powder is not a substitute — it contains acid and leaves a residue.
- Light-coloured cloths
- Several white or cream microfibre or cotton cloths, so any dye lifting off the cover is obvious straight away.
- Mild detergent
- A couple of drops of gentle washing-up liquid or wool-safe detergent diluted in cool water.
- Enzyme cleaner
- For urine, vomit and other protein-based spills. Dilute exactly as the label directs.
- Air movement
- An open window and a freestanding fan do more for drying than any heated appliance.
Step by step: cleaning a mattress
-
01 /
Strip the bed and read the care label
Take off the duvet, sheets, pillowcases and mattress protector, and put the washable items straight in the machine. Then find the label sewn into the mattress. It tells you whether the mattress can be flipped, whether the cover unzips, and whether liquids are off-limits — most memory foam is spot-clean only.
-
02 /
Deal with any fresh spill immediately
If something has just gone over, press a dry cloth onto it and hold rather than rub, working from the outside of the spill inwards. Change the cloth as it soaks up. A fresh spill is far easier to remove than one that has dried overnight.
-
03 /
Vacuum the whole surface, seams and sides
Fit the upholstery attachment, not the floor head. Work in slow, overlapping strips across the top, then do the sides, the seams and the piping with the crevice tool. This is where dead skin, dust and crumbs collect, and it's the step that makes the rest of the clean work.
-
04 /
Spot-treat stains one at a time
Dampen a cloth with the appropriate solution, wring it out until it is barely wet, and dab from the edge of the stain inwards so you don't spread it. Blot with a dry cloth afterwards and let the patch air-dry before deciding whether it needs another go. Never pour anything directly onto the mattress.
-
05 /
Deodorise with dry bicarbonate of soda
Once any damp patches are dry, dust a thin, even layer of bicarbonate of soda over the whole top surface and work a little into the seams with your fingers. Leave it for at least half an hour, longer for a musty mattress, while it absorbs odour and surface moisture.
-
06 /
Vacuum the powder off
Use the upholstery attachment again and go slowly, in overlapping passes, so no residue is left in the fabric. Finish with the crevice tool along the seams and around any tufting or handles.
-
07 /
Dry the mattress completely
Open the windows, run a fan across the surface, and stand the mattress on its side if the label allows. Heat is not the answer — a radiator, airing cupboard or hairdryer on a high setting can warp foam and set any remaining stain.
-
08 /
Rotate, re-dress and reset the routine
Rotate the mattress head-to-foot, or flip it if the label says it is two-sided. Put on a clean mattress protector and fresh bedding, and note the date so the next clean isn't a guess.
Treating the most common mattress stains
Match the treatment to the stain. Using the wrong one — hot water on blood, or a detergent scrub on a protein spill — can fix a mark permanently.
| Stain | What to use | How to do it |
|---|---|---|
| Blood | Cold water; 3% hydrogen peroxide on white covers only | Blot with cold water first — heat sets blood into the fibre. Dab, dry with a cloth, then air. Patch-test peroxide on a hidden area. |
| Urine (fresh) | Enzyme-based cleaner | Press out as much as possible with a dry cloth, apply diluted enzyme cleaner, leave for as long as the label says, blot and air-dry. |
| Urine (old, dried in) | Enzyme cleaner, then bicarbonate of soda | Damp the patch slightly with the enzyme solution so it can reach the crystals, let it work, dry it, then deodorise with bicarbonate. |
| Coffee, tea or soft drinks | Cool water with a few drops of mild washing-up liquid | Dab from the edge inwards, blot, then rinse by dabbing with a clean damp cloth and dry the area with a towel. |
| Sweat and body oil | Thin bicarbonate of soda paste, or mild detergent solution | Work a little paste into the yellowed area, leave it briefly, wipe off with a barely damp cloth and dry thoroughly. |
Odours, dust mites and allergens
Dust mites live deep in the filling, not on the surface, so no amount of surface cleaning will shift them. The bedding does the heavy lifting:
- Wash sheets, pillowcases and the mattress protector weekly, and at 60°C if anyone in the house has asthma or allergies.
- Pull the duvet back for half an hour each morning so the surface dries out before the bed is made.
- Keep bedroom humidity down; mites and mould both need moisture.
- Use a washable mattress protector rather than relying on the mattress itself.
For lingering smells, the bicarbonate step does most of the work — but track down the source. A musty smell that returns within days usually means damp in the filling, not a surface problem.
Drying: the step most people rush
Air movement beats heat every time. Stand the mattress on its side in a well-ventilated room with a fan pointed at it, and turn it after a couple of hours so the other face gets the airflow. Avoid direct strong sunlight for long periods, which can yellow the cover and degrade foam, and keep it off radiators entirely.
How often to do what
- Every day
- Pull the duvet back for half an hour before making the bed.
- Every week
- Wash bedding and pillowcases; use 60°C for allergy sufferers.
- Every month
- Vacuum the mattress surface, seams and sides.
- Every three months
- Rotate head-to-foot, or flip if the label says it is two-sided.
- Every six months
- Full clean: vacuum, spot-treat, deodorise with bicarbonate of soda and air.
- After any spill
- Blot and treat straight away, before it dries into the fabric.
What commonly goes wrong, and how to fix it
| Problem | What went wrong | What to do instead |
|---|---|---|
| A soggy patch that won't dry | Too much liquid went on | Stop adding anything. Blot hard with dry towels, then air with a fan for several hours. |
| A brown ring around a cleaned spot | Water spread past the stain and dried at the edge | Damp the whole area evenly, then dry it in one pass with a cloth rather than letting it dry in rings. |
| The mattress smells worse than before | It went back into service damp, or powder sat in a humid room | Re-vacuum, then air it in a dry room with a fan for a full day before dressing the bed. |
| The stain reappears a day later | It soaked into the filling and only the surface was treated | Repeat with less liquid, blot deeper and allow much longer drying time. |
| Foam feels stiff or crunchy | Detergent residue left in the fabric | Dab with a clean, barely damp cloth to rinse, then dry thoroughly before use. |
| Cover looks faded or patchy | A harsh product, or scrubbing rather than dabbing | Patch-test first, use mild detergent and always dab from the edge inwards. |
When cleaning stops being the answer
Some problems are beyond a cloth and a vacuum:
- Mould through the filling — visible bloom on the surface usually means it goes deeper. Cleaning the surface won't reach it.
- Bed bugs — a cleaning job cannot fix this. It needs proper treatment, and often a new mattress.
- A mattress soaked right through — if it stays damp after a full day of airflow, mould will follow.
- Sagging, broken springs or a torn cover exposing foam — no amount of cleaning will restore it.
Frequently asked questions
Can I use a steam cleaner on a mattress?
Some handheld steam cleaners are sold for upholstery, but steam puts water into the filling. If you use one, keep it moving, use the lowest moisture setting, check the care label first, never use it on memory foam, and dry the mattress with a fan afterwards.
How long before I can put the bedding back on?
Until it feels completely dry to the touch, including the seams and any thicker areas — usually several hours in a warm room with windows open or a fan running. If it feels at all cool or damp, give it longer.
Can I machine wash the mattress cover?
Only if the care label says so and the cover unzips. Use a gentle cycle at the temperature on the label and air-dry it rather than tumble drying, which can shrink it. Covers that don't come off should be spot-cleaned only.
Does bicarbonate of soda kill dust mites?
No. It is a deodoriser that absorbs surface moisture and smell, not a mite treatment. Washing bedding at 60°C and keeping bedroom humidity down do far more against dust mites.
Is white vinegar safe on a mattress?
Diluted white vinegar can help with some odours and light marks, but the smell lingers and acids aren't ideal on every foam. Patch-test on a hidden area, keep it well diluted and never soak the fabric.
What if the mattress gets soaked through?
Blot as much as you can, stand it on its side with a fan and open windows, and don't put bedding back until it is bone dry. If it stays damp or smells musty after a couple of days, mould has probably taken hold in the filling.


